In 2017, Americans recycled nearly 54 billion aluminum cans, a figure that stands for over 53% of the total cans created in 2002. The aluminum market paid over $800 million for the used beverage containers.
Inning accordance with statistics reported by The Aluminum Organization, the Can Manufacturers Institute (CMI), and also the Institute of Scrap Recycling Industries (ISRI), the aluminum beverage container is by far the most recycled consumer drink package in the United States and also internationally, by units, pounds as well as percentage reused. It totals up to greater than twice the recycling rate and recycled material percents for drink containers of various other products, including glass and also plastics.
Since the aluminum beverage containers and cans are 100 percent recyclable, the majority of them can and are recycled right into new drink cans. Recycled aluminum cans are back on the grocery store rack in about 90 days, and also the procedure could be repeated countless times. This is achieved due to the fact that the aluminum can is the only product packaging material that greater than covers the expense of collection and re-processing for itself.
How To Understand If a Can Is Aluminium?
Around 75% of drink cans are made of aluminium. Using magnet is the easiest method to check a can -if the magnet does not stick to its side, it is aluminium. Also, if you compare the base of a steel can, it is much shinier and heavier than aluminium.
Aluminium Can Recycling Process
Stage 1: Collection
Aluminium cans are collected for recycling and cleaned by your waste management company. Once collected the cans are checked to ensure they do not have any kind of steel, plastic, paper, dirt or excess liquid as these can disrupt the recycling process. If everything is alright, the cans are baled as well as moved to the recycling plant.
Stage 2: Recycling Itself
The mere recycling process has 4 stages:
- Shredding: Mechanical hammers shred the flattened cans right into little pieces (approximate size 50p);
- Decoating: With the help of a blowing hot air (932ºF) the decoration is removed from the former cans;
- Melting: The shreds are melted in a furnace heated to 1400 ºF;
- Casting: The molten metal flows into molds and also is cooled by jets of water. As it cools and the metal hardens and also an ‘ingot’ is created, which weighs 27 tonnes.
Stage 3: Rolling
The ingots are pre-heated to 1100 ºF and undergo their first rolling. They are after that ‘cold rolled’ to the specific requirements and density needed by the can manufacturer.
Stage 4: Can Manufacturing
The aluminium sheet is lubricated and fed through a cupping press. This cuts, or blanks, countless shallow cups. The sides of the cups are raised to develop the can shape by being rammed through a collection of rings. The can is trimmed as well as washed all set for decorating.
The inside and also beyond the can is treated with a lacquer. This creates the skim coat for the outside decor and stops the components interacting with the metal inside. After the decor has actually been applied the cans are dried in a stove and afterwards gone through a necker/flanger to prepare them to take the can end.
Aluminum is the highest-value product recovered and also returns the best income stream of all recycled materials. Analysts concur that if not for the aluminum can, recycling might not exist as we know it, merely due to business economics. As an example, reusing a single lots of aluminum cans returns approximately $1,200 of income. In contrast, the savings from recycling a ton of steel, plastics, glass, or paper comes no place near covering the average collection expense of concerning $200 per lot. Recycling is necessary to the aluminum market’s procedure, and also as a result of effective grassroots reusing initiatives it has become the symbol for recycling as a whole. No other material has an identity so closely connected with recycling, as does aluminum.
iSustain Recycling offers industrial metal recycling services to help you handle huge amounts of metal, putting money back into your pocket in the process. If you have any questions regarding aluminium, brass, copper or any other metal recycling, only an experienced professional can provide you the answers. Don’t hesitate to contact iSustain Recycling and start recycling as soon as possible!